Skip to content
SecurityGuidesFacilities

Thermal, PTZ, and LiDAR survey of derelict buildings

Using the OLO platform to patrol vacant and derelict structures for mould, asbestos, and trespassers with a thermal PTZ payload, AI image recognition, repeated photo routes, and internal LiDAR scanning.

OLO Robotics Team · · 8 min read

Vacant shops, boarded housing, and stripped-out industrial units are expensive to watch and risky to enter. Trespassers cause damage, mould spreads in damp isolated rooms, and asbestos and other contaminants can cause a risk for years after a structure is abandoned. Sending staff on repeat walk-throughs for “another look” stacks lone-working, respiratory, and structural risk without giving you a comparable archive.

This guide is for estates, facilities, and security teams who need evidence from outside and controlled entry inside before human intervention. It covers patrol rounds on a thermal–PTZ-equipped wheeled quadruped, AI-assisted damage detection, repeat photo comparison between patrols, and internal LiDAR for change over time. For formal confined-space programmes once entry is planned, pair this with confined space inspection.

Why repeat human walk-throughs are the wrong default

  • Trespass and occupation. Forced doors, discarded belongings, and camp fire scorch marks change between visits. Memory and phone photos do not prove timing.
  • Health hazards. Mould blooms, pigeon waste, and dust change aggressively, and measuring actual growth is difficult without comparative evidence.
  • Structural decay. Roof line sag, fresh cracking, and missing cladding show up slowly. Without aligned stills, you cannot see what moved over months.
  • Asbestos and contaminants. Disturbance risk rises every time someone opens a sealed room, putting your team in harm's way.

A repeated robotic patrol provides consistent results that consist of comparable images and data to accurately measure change and assess whilst remaining safe.

Phase 1: external thermal and PTZ rounds

Start from public paths, car parks, and land you already patrol. Place waypoints where PTZ can frame façades, roofs, hoardings, and informal access points. At each stop, capture thermal and colour stills with presets—not ad hoc zoom on the night.

External survey stops on derelict or vacant buildings
StopThermal usePTZ use
Main hoarding or fence lineHeat behind boarding (occupation, fires)Forced entry, new holes, tagging
Roof line and elevationsHot spots in openings or flat roofsMissing tiles, sag, vegetation ingress
Doors and loading baysWarm thresholds after hoursOpen shutters, broken glazing, debris piles
Adjoining yard or car park interfaceFly-tip and refuse heatVehicles or routes into the building

Thermal highlights occupation and fire risk before staff approach. PTZ supplies enforcement and insurer-grade stills when hoardings fail. Keep the same palette, distance, and time window each round.

Phase 2: repeat rounds and AI-assisted change detection

Value builds when the 1st round and the 100th are aligned. Name every stop in OLO (north elevation bay 2, loading door B, roof ridge west) and store captures under that waypoint across dates. Review is then a catalogue per location, the same model as repeatable construction progress photography, applied to decay and intrusion instead of build stages.

  • Side-by-side review. Operators scrub two dates at the same waypoint before anyone is sent to site.
  • AI vision assists, humans decide. Object and change models can flag new holes in hoarding, broken windows, fresh graffiti, or debris piles.
  • Escalation rules. Trespass indicators go to security; structural changes to the building surveyor; heat anomalies to the fire liaison path you already use on estate patrols.

Phase 3: internal LiDAR and camera when entry is robot-safe

Once inside the building, the same platform can run mapped internal routes. LiDAR builds or updates a 3D snapshot per visit; comparing clouds over time shows bulging walls, new rubble piles, collapsed ceilings, or propped structures that a single photo round might miss. Pair LiDAR with fixed camera stills at corridor intersections and plant rooms so visual and geometric change both sit in the archive.

This is not a substitute for asbestos surveys, gas testing, or structural engineering sign-off. It reduces how often people enter to “have another look” and gives specialists a time-stamped baseline before they kit up. Rehearse unfamiliar geometry in simulation where you have a prior scan or model; the first physical run still proves steps, debris, and cable runs the model missed.

Payload and platform notes

Wheeled quadrupeds carry thermal–PTZ heads and LiDAR across rubble, kerbs, and broken ground better than conventional rovers on many estate interfaces. Tight stairwells and severely collapsed internals may still need a smaller platform or a confined-space workflow. Match the robot to the route before you promise full building coverage—see wheeled quadrupeds on mixed-terrain patrols.

Three-week pilot on one building

  1. Week 1: External walk with estates and H&S. List waypoints, thermal palette, PTZ presets, and no-go zones. Run one manual reference round.
  2. Week 2: Autonomous external loops on schedule. Test AI or manual diff review on hoarding and elevation stops.
  3. Week 3 (if cleared): One internal route with LiDAR plus camera stills. Compare against reference; agree who receives change flags.

Cloud simulation helps rehearse waypoints and payloads before hardware is on site. When you are ready to scope a derelict portfolio, talk to our team or compare plans.

For the developersof robotics.

Test in simulation. Visualise, teleoperate and script in the browser. No installation required.

TypeScript and Python SDKs
Browser-based development
AI-assisted code generation